Volkswagen - Delivery Protocols

Navigate to Settings:

• Home Screen: Tap the 'Home' button on the display.

• Settings Icon: Look for a 'Settings' or 'Setup' icon and tap it.

Review Centre Display Settings:

• Display Settings: In the settings menu, select 'Display' to adjust brightness, contrast, and screen timeout.

• Language and Units: Adjust language preferences and measurement units.

• System Updates: Check for any system updates to keep your infotainment system current.

Helpful Resources:

• Infotainment System

Adaptive Cruise Control (ACC)

• Function: Maintains a set speed and distance from the car ahead.

• Activate: Press the ACC button on the steering wheel.

• Set Speed: Use the controls to set your desired speed.

• Adjust Distance: Use the distance setting button to adjust the following distance.

Lane Keeping Assist (LKA)

• Function: Helps keep the vehicle centered in its lane.

• Activate: Press the LKA button on the steering wheel or dashboard.

• Monitor: The system will alert you if you drift out of your lane without signaling.

Blind Spot Monitor

• Function: Alerts you to vehicles in your blind spots.

• Activate: Typically always on, but can be toggled through the vehicle settings.

• Visual Alert: Look for an illuminated icon in your side mirrors when a vehicle is detected in your blind spot.

Rear Cross-Traffic Alert

• Function: Warns of approaching traffic when reversing.

• Activate: The system is usually active when the vehicle is in reverse.

• Audible and Visual Alerts: Beeps and dashboard alerts will notify you of approaching vehicles.

Forward Collision Warning and Autonomous Emergency Braking (FCW and AEB)

• Function: Alerts you of potential collisions and applies brakes if necessary.

• Activate: These features are typically always on, but can be adjusted in the settings.

• Response: The system will give an audible warning and apply brakes if a collision is imminent.

Park Assist

• Function: Helps with parallel and perpendicular parking.

• Activate: Press the Park Assist button.

• Follow Instructions: Follow on-screen prompts and use the steering wheel and pedals as directed by the system.

Traffic Sign Recognition

• Function: Detects and displays road signs on the instrument cluster.

• Activate: Typically always on, but can be toggled in the settings.

• Display: Keep an eye on the instrument cluster for detected traffic signs.

Driver Attention Monitor

• Function: Alerts you if signs of drowsiness or inattentiveness are detected.

• Activate: The system is always active and will alert you if it detects patterns of inattentive driving.

Helpful Resources:

• Adaptive Cruise Control

• Lane Keeping Assist

Fluid Checking: Locate the hood release level inside the vehicle and release the secondary latch under the hood

• Engine Oil

  • Find the dipstick, which usually has a yellow or orange handle.

  • Check the Oil Level:

    • Pull the dipstick out, wipe it clean with a cloth, reinsert it fully, and then pull it out again.

    • Check the oil level against the markers on the dipstick. It should be between the minimum and maximum markers.

• Coolant

  • Find the coolant reservoir, a translucent container with a “low” and “full” marking.

  • Look at the side of the reservoir to see the coolant level. It should be between the “low” and “full” marks.

• Windshield Washer

  • Find the reservoir, typically marked with a windshield/water symbol on the cap.

  • The reservoir is usually translucent, allowing you to see the fluid level. If it’s not visible, you can open the cap and look inside.